888.345.SOLD [email protected]

Complete Nickel/Chrome Plating Facility

17sep5:00 pm5:00 pm Sale TypeSealed Bid OfferingDecommissioned, Re-engineered and RefurbishedComplete Nickel/Chrome Plating FacilityGeography:Nevada

 

 

(3) Automated Jessup Plating Lines, Plus Support Equipment

Nickel/Chrome • POP • Copper
Primary Line | Nickel/Chrome Line Refurbished in 2024 – Never Installed

Originally built by Jessup Engineering for Markland Industries, Inc., these three automated rack plating lines were acquired for a new operation that never entered production. The nickel/chrome line was fully decommissioned, re-engineered and refurbished, then placed in indoor storage awaiting installation. Increased electrical demand from nearby data centers prevented the site from securing the power required to operate, and the project is now being liquidated: a rare opportunity to acquire complete, installation-ready plating systems. Nearly $4 million in acquisition, de-installation, re-engineering and refurbishment of the facility. All equipment has been professionally cleaned and is ready for transportation.

T H E   L I N E S

(2024 Refurbished) 2010 Jessup Automated Nickel/Chrome Rack Plating Line – PRIMARY LINE
Never used since refurbishment | Six-stage nickel | Trivalent and hexavalent chrome as separate stations

Tanks 118″ wide × 98″ deep, length varies | (42) new process tanks, approximately 78,500 gallons | (11) Dynapower water-cooled SCR rectifiers to 7,500 A
Process chain, re-engineered in 2024: separate steel and copper-substrate cleaning trains, an acid activator served by its own rectifier for electrolytic activation, electroless nickel with dedicated rinses, Woods nickel strike, then semi-bright nickel across two three-section tanks, high-sulfur, bright, satin and particle nickel, finishing in trivalent chrome and hexavalent chrome as separate stations, with a position provisioned for black chrome. Engineered filtration on 13 positions, approximately 114,700 GPH, with three turnovers per hour on each 6,050 gallon nickel tank. Rated 6 loads per hour. Rack size 24″ DOT × 118″ wide × 96″ deep. Four refurbished 2,000 lb programmable automated hoists, new computer-based HMI control system, new mezzanine, track and frame structure, new in-line dryer, new loading and unloading equipment, and all associated engineering files. Two-row return-flow layout with transfer shuttle and elevated catwalk access. Estimated installation area 118 × 115 feet, 23 feet high, per Koch engineering. Installs above floor on piers within curbed containment: no trench or below-grade work required. Utilities: 480V / 3-phase / 60 Hz, 120 VDC controls, natural gas 1 to 5 PSIG, compressed air 80 PSIG, process water 45 PSIG. Total connected load 2,307 A at 480V / 3-phase, approximately 1.9 MVA, including a 418 A ventilation panel and a 90 A hoist panel. New tank fabrication is held between indoor storage in Nevada and the fabricator’s plant in Missouri.

2010 Jessup Automated POP Rack Plating Line

Tanks 118″ wide × 66″ deep, length varies | (30) process tanks | (5) Dynapower water-cooled SCR rectifiers
Rated 11 to 12 loads per hour as originally installed. Rack size 12″ DOT × 106″ wide × 48″ deep. Three 2,000 lb automated hoists. Supplied with a new control panel as part of the 2024 project. Dismantled and stored as components.

2011 Jessup Automated Copper Rack Plating Line

Tanks 96″ wide × 66″ deep, length varies | (30) process tanks | (8) Dynapower water-cooled SCR rectifiers
Rated 10 to 12 loads per hour as originally installed. Rack size 12″ DOT × 83″ wide × 48″ deep. Three 1,000 lb programmable overhead center-column hoists. Dismantled and stored as components.

Each line is engineered to operate as a stand-alone system.

D O C U M E N T A T I O N

Engineering drawings and schedules, equipment and inventory records, and a detailed photographic record are available to interested parties, together with a summary of the 2024 re-engineering and refurbishment scope. Material continues to be added as it is released. Request access under Downloads.

Sale Date(s) & Time(s)

Bid Deadline: September 17

Overbid (if necessary): September 24

Preview Date(s) & Time(s)

By Appointment

Location(s)

Henderson, Nevada
Additional Assets Located in: Michigan & Missouri

 

Downloads

Important Information

Please click on each section (>) below for important sale information:

 

Terms of Sale - Highlights

The following highlights key sale terms and identifies sale specific terms, which are also detailed on the bidding site. These, along with our General Terms & Conditions of Sale comprise the Complete Terms of Sale. To confirm your responsibilities as a buyer, please review the items below and view or download the General Terms & Conditions of Sale. NOTE: Terms are subject to modification; please verify terms prior to bidding. All references to Agent encompass ThreeSixty Asset Advisors, CA Global Partners, Fram Fram LLC, their bidding platforms, agents and representatives.

 

  • SALE FORMAT: This is a SEALED BID sale, not a live or timed online auction. Bids are due by the Sealed Bid Deadline of 5:00 PM Pacific, Thursday, September 17, 2026. If Agent determines an overbid round is warranted, qualifying bidders will be invited to submit improved bids by 5:00 PM Pacific, Thursday, September 24, 2026. Agent and Seller reserve the right to accept or reject any and all bids, in whole or in part, to negotiate with one or more bidders, to withdraw assets at any time, and to accept a bid and conclude the sale at any time prior to the Sealed Bid Deadline. Submission of a bid does not obligate Seller to sell. No bid is binding on Seller until accepted in writing.
  • BIDDING: Bids are invited on any line individually or on any combination of lines. Wastewater treatment components and process chemical inventory are offered as separate lots. All remaining support assets, including boilers, chillers, scrubbers, RO and water treatment, compressed air and the QA laboratory, are available to line bidders to add to their offers. Bids must be submitted on the form provided, must identify the lot or combination bid upon, and must be received by the deadline. Bids are confidential and no bid history is published. All sales are subject to Seller confirmation and to any reserve.
  • REPRESENTATIONS: We do our best to provide information that will help Buyers to make purchase decisions; however item descriptions are offered as a guide. We do not guarantee descriptions, counts, materials, dimensions or conditions. Conditions are not stated for most items, but photographs attempt to show visual conditions of an item. While we may provide a condition note, the absence of a condition note or photo identifying a condition shall not imply that no condition issues exist. Equipment counts, ratings, capacities and dimensions are drawn from prior owner records, manufacturer documentation and engineering drawings, are estimated, and are not warranted. Bidders are urged to inspect. Further, neither Agent nor Seller makes any representation, guarantee or warranty as to the provenance, authenticity, completeness or operability of any items offered for sale, or the conveyance of any third party rights, including but not limited to copyrights, software licenses or process licensure. If an item is not stated in a lot description, assume it is not included. If you are uncertain about a lot, do not bid. All Items are sold ‘As-Is, Where-Is’, with all faults and without recourse. Buyer assumes all risks, all sales are final and under no circumstances will any claims be considered once purchases are removed from the sale site.
  • CONDITION AND ASSEMBLY: The nickel/chrome line was decommissioned, re-engineered and refurbished in 2024 and has not been installed or operated since. The POP and copper lines were dismantled and relocated in 2023 and are stored as components. No line is standing or assembled. Ratings and production rates are as originally installed and are not a representation of performance following reinstallation. Reinstallation, engineering, permitting and commissioning are the sole responsibility of Buyer.
  • MULTIPLE LOCATIONS: Assets are located in Nevada, Michigan and Missouri. Buyers are responsible for removal from every location at which assets awarded to them are stored. Inspection at each location is by appointment.
  • SHIPPING: Shipping, rigging and transport are the responsibility of the Buyer and are NOT provided by Agent or Seller. SEE REMOVAL BELOW
  • PAYMENTS: Payment on this sale is by wire transfer only; credit cards are not accepted. A non-refundable deposit of twenty-five percent (25%) of the accepted bid is due within two (2) business days of written notice of award, with the balance due within seven (7) calendar days of award (see Payments Section below for more details). No asset will be released until payment has cleared in full. In the event an invoice remains unsettled after the payment deadline, we reserve all rights to pursue damages, including the right to retain the deposit or pursue 25% as liquidated damages and/or resell the assets on the invoice.
  • BUYER’S PREMIUM: None. No Buyer’s Premium will be added to accepted bids on this sale.
  • SALES TAX: Applicable state and local sales or use tax will be added to the purchase price for the jurisdiction in which the assets are located, unless Buyer provides a valid resale or exemption certificate acceptable to Agent and to the applicable taxing authority, at Agent’s sole discretion. Buyers are responsible for determining and satisfying their own tax obligations.
  • REMOVAL: Removal is by appointment and is coordinated between Buyer, Buyer’s rigger and Agent at each location. Assets are located in Nevada, Michigan and Missouri, and each location is scheduled separately. BUYERS ARE SOLELY RESPONSIBLE FOR ALL DISCONNECTION, DISMANTLING, RIGGING, LOADING, TRANSPORT AND REMOVAL, AT BUYER’S SOLE COST AND RISK, AND MUST SUPPLY ALL EQUIPMENT, RIGGING, MATERIALS AND MANPOWER NECESSARY TO REMOVE THEIR PURCHASES FROM WHERE THE ITEMS SIT; Agent and Seller do not provide rigging, loading, crating, packing, manpower or shipping services of any kind. Buyer’s rigger must provide a certificate of insurance naming ThreeSixty Asset Advisors and the property owner as additional insured, in form and amount acceptable to Agent, prior to entering any site. ALL ASSETS MUST BE REMOVED BY 5:00 PM LOCAL TIME, FRIDAY, OCTOBER 31, 2026.
  • PERMITS, ENVIRONMENTAL AND HANDLING: Buyer is responsible for obtaining and maintaining all licenses, permits, manifests and approvals required to take possession of, handle, transport and store the assets, including any process chemicals, and for compliance with all applicable federal, state and local environmental, transportation and workplace safety requirements. Process chemical inventory is offered only to Buyers able to demonstrate that they are lawfully able to receive and transport it. Neither Agent nor Seller assumes any liability for Buyer’s handling, transport, storage or use of any asset.
  • DEFAULT: Upon award of bid, Buyers are deemed responsible for a non-refundable 25% deposit. While Agent may elect not to collect the deposit in good faith, in the event of a Buyer default, Buyer’s acceptance of these Terms of Sale, evidenced by their participation in the sale, shall serve as Buyer’s authorization for Agent to pursue whatever means necessary to collect upon the 25% deposit as liquidated damages. In addition to the collection or retention of Buyer’s deposit, Agent may resell the assets and may report Buyer’s failure to perform on its obligations to the Bidding Platform’s system impacting Buyer’s future ability to participate in future sales.
  • BIDDING DISCLAIMER: Agent reserves the right to add, delete, combine or divide lots, as well as adjust deadlines, the overbid schedule, or add or remove reserve prices. The sale relies on third party systems and technology that may be subject to connection interference and other systems failures. Agent reserves the right to take such actions it deems appropriate and fair to resolve bidding issues as a result of such technology issues or human error.
  • OTHER: Agent is acting as agent only and is not responsible for the acts or omissions of its client. Agent is not the shipper, rigger or exporter of any purchased items being shipped from the sale site. These terms and conditions together with any amendments or modifications expressly made by the Agent constitute all the terms and conditions with respect to the sale of the assets offered. There are no representations, warranties, terms, conditions, undertakings, or collateral agreements except as hereinabove provided. Agent reserves the right to add, combine, delete or sell lots prior to the sale.
  • See the General Terms & Conditions of Sale for complete buyer obligations.
Bid Submission & Overbid
  • SEALED BID DEADLINE: 5:00 PM Pacific, Thursday, September 17, 2026.
  • OVERBID DEADLINE, IF APPLICABLE: 5:00 PM Pacific, Thursday, September 24, 2026. An overbid round will be held only if Agent determines one is warranted. Bidders invited to the overbid round will be notified directly.
  • HOW TO BID: Bids are submitted on the bid form available at 360Bid.sale or by request to [email protected]. Bids must identify the bidder, the lot or combination of lots bid upon, the bid amount for each, and any conditions. Bids stated as conditional or contingent may be rejected.
  • BID ANY COMBINATION: Bids are invited on any line individually or on any combination of lines. Support assets may be added to a line bid. Wastewater treatment components and process chemical inventory are offered as separate lots.
  • EARLY ACCEPTANCE: Seller reserves the right to accept a bid and conclude the sale at any time prior to the Sealed Bid Deadline. Bidders who wish to be considered are encouraged to submit early.
  • ACCEPTANCE OR REJECTION: Agent and Seller reserve the right to accept or reject any and all bids, in whole or in part, and to negotiate with one or more bidders. Highest bid does not guarantee award. No bid is binding on Seller until accepted in writing.
  • CONFIDENTIALITY: Bids are confidential. Bid amounts and bid history are not published.

Payments

  • Payment on this sale is by WIRE TRANSFER ONLY. Credit cards are not accepted;
  • A non-refundable deposit of twenty-five percent (25%) of the accepted bid is due within two (2) business days of written notice of award;
  • The balance is due within seven (7) calendar days of written notice of award;
  • Wire transfer instructions will be provided with the award notice. Buyers with payment questions may contact our office at 805-496-8087, option 3;
  • Payments are not accepted at the sale site;
  • No asset will be released, and no removal will be scheduled, until payment has cleared in full;
  • Sales tax exemption and resale certificates can be emailed to [email protected]

Inspection

Inspection is by APPOINTMENT ONLY and is strongly encouraged. Assets are located in Nevada, Michigan and Missouri, and separate appointments are required for each location.

 

Engineering documentation, equipment records and additional photographs are available to interested parties. Request access under Downloads above.

 

To schedule a site visit, email [email protected] or call Jeff Tanenbaum at 720-704-5421. Bidders are urged to inspect prior to bidding. Bidding without inspection is at Buyer’s sole risk.

Removal

Removal of these assets is a coordinated operation rather than a counter pickup. Agent will work with Buyer and Buyer’s rigger to schedule a removal window at each location that accommodates the scope of the work.

 

Scheduling. To arrange removal, contact [email protected] or call 805-496-8087, option 3. Removal takes place by appointment during agreed and reasonable business hours at each location. Assets are located in Nevada, Michigan and Missouri, and each location is scheduled separately. Buyers should contact us early to allow adequate lead time for rigging and transport arrangements.

 

Deadline. ALL ASSETS MUST BE REMOVED BY 5:00 PM LOCAL TIME, FRIDAY, OCTOBER 31, 2026. No asset will be released, and no removal will be scheduled, until payment has cleared in full.

 

Buyer responsibilities. Buyers are solely responsible for all disconnection, dismantling, rigging, loading, transport and removal, at Buyer’s sole cost and risk. Agent and Seller do not provide rigging, loading, crating, packing, manpower or shipping services of any kind. Buyers must supply all equipment, rigging, materials and manpower necessary to remove their purchases from where the items sit. Buyers are responsible for removal from every location at which assets awarded to them are stored.

 

Insurance and site requirements. Buyer’s rigger must provide a certificate of insurance naming ThreeSixty Asset Advisors and the property owner as additional insured, in form and amount acceptable to Agent, prior to entering any site. Buyers and their representatives must comply with all site safety requirements and with all applicable federal, state and local regulations while on site.

 

Authorized parties. Buyer must identify its rigger, transport provider and any authorized representatives to Agent in writing in advance of removal. Assets will not be released to any party not identified by Buyer in writing.

 

Site condition. Buyers must leave the removal area clear and are responsible for any damage to the building, floor, dock or remaining property caused by Buyer or its contractors.

 

Abandonment. Assets not removed by the removal deadline may be deemed abandoned, and Agent reserves the right to remove, store or dispose of them at Buyer’s expense, without refund.

Riggers & Transport

Buyers may use their own rigger and transport provider, subject to the insurance and site requirements set out in the Removal section above.

 

Third party rigger and transport referrals may be posted as they are confirmed. Any referral is provided for convenience only, is not affiliated with ThreeSixty Asset Advisors, and does not alter Buyer’s obligations for removal under the terms of sale. Costs vary based on scope, weight, distance and destination.

Contact Information

General Info: 1-888-345-SOLD
Sale Inquiries & Site Visits: [email protected] or Jeff Tanenbaum, 720-704-5421
Payments: 1-805-496-8087, option 3
Removal Scheduling: [email protected]

Sale in Cooperation With: