888.345.SOLD [email protected]

Cannabis Co-Packing Facility - Beverage/Flower/Vape/Edibles

29oct10:30 amSale TypeOnline Only AuctionBy Order of State Court ReceivershipCannabis Co-Packing Facility - Beverage/Flower/Vape/EdiblesGeography:Desert Hot Springs, CA

View Items & Bid

 

By Order of State Court Receiver in the Matter of:

27,000 +/- Square Foot Co-Packing Facility
Beverage Processing | Bottling | Canning | Flower Jarring | Vape Filling
Plus General Packaging & Facility Support Equipment, Including:
:


BEVERAGE EQUIPMENT

  • Wild Goose WG 5-Evolution Canning System – 5 auto fill heads, auto lid drop, auto seamer, 50 cpm w/ rinse and air nozze RT-STD, WGC Blocks and Standoffs Kit and Manual Sweep Whale Tail Depalletization & ACC-PO Accumulation Packout
  • Inline-Filler Combo Filler w/ Hot Fill Upgrade – 8-Head Carbonated
    6-Head Pressure Overflow, Rinser & Dryer unit with Powered Conveyor & Kaps-All Model C8 Automatic Inline Screw Capper
  • Dosing Unit, Lanxess Velcorin DT 3 Touch
  • Brite Tanks Apex (4) 20BBL Jacketed Brite Tanks
  • Brite Tanks Apex (2) 3300 304 Stainless Steel Brite Tanks; 11ft tall x 10ft wide
  • Blending Tank CMS 605 Gallon w/ Split Hinged Covers, Full Sweep Agitator and 1 hp Drive, Plastic Rotating Scrapers & 108″ x 72″ Mezzanine
  • Ultrasonicator Sonomechanaics ISP-3000 Generator
  • Batch Pateurizer Pro Engineering 2-Tray Batch Pasteurizer
  • Chart CryoDoser Flex Liquid Nitrogen Dosing System 
  • Trane 70 Ton Air-Cooled Glycol Chiller CGAM070F2,
  • RSD Fiberglass Cooling Tower w/ Nominal 125 Ton 3HP Motor,
  • Thermaline Gasketed Plate and Frame 3-Section Heat Exchanger Model T-20
  • Pumps, Valves, Regulators, Glycol Storage Tanks and Control Units


FLOWER PACKAGING

  • (2) Flower Packaging Lines:
    Ohlson 14 Head S/S – High Accuracy Weighing Machine Model MHW-CW14-1/2-SSF Accurate to .01 Grams w/ Digital Programmable Controller, MHW-4CW-4R Check weigher and reject system, 44 sq ft. Raised Platform, S/S Indexing Conveyor Model 8-CON-STR w/ PLC controls for container stop-fill-release, S/S Floor Level Supply Hopper Model AIR-5-CU, S/S Vertical Bucket Elevator Model VB-18-6-2LSS
  • Capper EPAK Automatic 4 Station Spindle Capper
  • (6) EPAK 60″ Loading Turntables


VAPE/FLOWER/GUMMY PROCESSING

  • Hibar Machine Hibar 3303 X-Y Robot w/ Upgraded Pump
  • Robotic Cartridge Filler ATG RoboCAP RL-500 w/ AF600 Peristaltic Pump
  • Separator Russell Finex FINEX 30 Separator
  • Futurola Shredder
  • Futurola Venturi Shrink Sleeve Labeler
  • GreenBroz 420 Dry Trimmer
  • Gummy Depositor Savage Bros Universal XL Tabletop Mold Depositor – 12L

PACKAGING SUPPORT

  • Sleeving Machine Axon EZ-150SL
  • Shrink Tunnel Axon Model EZ-108-SRB
  • Heat Conveyor Axon TTC-21S
  • Labeller EPAK/Tronics Series 3 “Open Style” Labeling System
  • Case Sealers 3M 7000r Pro Case Sealers (Multiple Units)
  • Induction Sealer EPAK Super Seal 75
  • Labeler Printer VideoJet VJ Dataflex 6330 Printer – RH 32MM


FACILITY SUPPORT

  • Ultrasonic Humidifiers
  • Mini Chillers
  • S/S Worktables
  • Rolling Kitchen/Baking Racks
  • Reach-in Refrigeration Unit
  • Baking Trays
  • Pallet Racking Approx. 40 Sections
  • Expandable Conveyors
  • Transfer Pumps

*Note: Asset Listing is Subject to Change.  Check auction catalog for final listing.

Questions about the sale, call toll free: email [email protected]
Never attended an auction?  Learn how to bid by reading frequently asked questions here.

Sale Date(s) & Time(s)

Catalog Online:  Now
Catalog Open for Bidding: 
October 21
Online Bidding Closes:  October 29 starting at 10:30am

 

Preview Date(s) & Time(s)

Tuesday, October 22 from 10am to 4pm

Location(s)

15850 Little Morongo Road, Desert Hot Springs, CA

 

View Items & Bid

Important Information

Please click on each section (>)  below for important sale information:

 

Terms of Sale - Highlights

The following highlights key sale terms and identifies sale specific terms. These, along with our General Terms & Conditions of Sale comprise the Complete Terms of Sale. To confirm your responsibilities as a buyer, please review the items below and view or download the General Terms & Conditions of Sale.

 

  • INSPECTION: Tuesday, October 22 from 10am to 4pm
  • DEPOSITS: We reserve the right to authorize your credit card for $500 as an initial Auction Registration deposit and to increase the deposit to equal 25% of your total high bids. This authorization will place a 3-7 day hold on these funds with your credit card company, but will not be charged unless purchases are made.  Bidders intending to spend in excess of $10,000 or International Bidders must make arrangements to provide a cash form of deposit (i.e. Wire Transfer) prior to the Sale to avoid bidding interruption;
  • PAYMENT DEADLINE: All payments are due by upon receipt of Invoice and no later than 5:00 pm on the day following the auction;
  • PAYMENT FORMS: Payments may be made by credit card (up to $5,000), or wire transfer only.  Invoices under $5,000 will be provided with a link to pay by credit card.  Credit card payments are subject to a 4% surcharge. If you prefer to pay by wire transfer, please email [email protected].
  • BUYER’S PREMIUM: An 18% Buyer’s Premium will be added to the price of each item. 
  • SALES TAX: Sales tax (based on the purchased item’s location) will be assessed on the purchase price plus buyers’ premium, unless you provide evidence of sales tax exemption, acceptable to ThreeSixty, prior to the close of the Auction.  See General Terms & Conditions of Sale and Resale Exemption Forms below for more details.
  • REPRESENTATIONS: We do our best to provide information that will help Buyers to make purchase decisions, including indicating damage on items where known; however we do not guarantee descriptions or conditions. Further, neither Auctioneer or Seller makes any representation, guarantee or warranty as to the provenance, authenticity or operability of any items offered for sale.  If you are uncertain about an item, do not bid. All Items are sold ‘As-Is, Where-Is’, with all faults and without recourse. Buyer assumes all risks, and all sales are final.
  • REMOVAL: Buyers are responsible to make arrangements for items to be removed during posted times.  All removal is by APPOINTMENT ONLY.  Paid Buyers can schedule appointments by emailing [email protected].  Buyers arriving without an appointment will be accommodated on an ‘as available’ basis or may be turned away.  For assistance with shipping or rigging, please see our list of unaffiliated, 3rd party shippers.  Buyers must bring all materials, carts and manpower necessary to remove their purchases from where the items sit and used licensed and insured riggers for installed items; we do not offer any loading or shipping services.  IMPORTANT: Buyers must arrive with an ID that matches the name on the invoice.  If sending a 3rd party to pickup on your behalf, you must complete and submit an Agent Release form to our office authorizing the 3rd party to pickup on your behalf.  The 3rd party must provide ID matching the Agent Release form and sign documentation upon arrival at pickup.
  • REMOVAL TIMES:
    • We will NOT be open on the day of or day following the auction.
    • We will schedule appointments on the following days and times:
      • Friday November 1 – Friday November 8
      • 9am to 5pm Each Day (Closed Sunday)
      • Appointment Required
  • INSURANCE REQUIREMENTS: Any buyer or buyer representative picking up items which require dismantling, rigging, utility disconnection, forklift or other machinery use onsite, etc., will need to provide a Certificate of Insurance with the following limits: General Liability 1M per occurrence / 2M aggregate; Umbrella 2M per occurrence / 2M aggregate; Auto 1M (owned/non-owned/hired); Workman’s Compensation Liability at statutory limits.  The following parties should be named as additional insured:  “ThreeSixty Asset Advisors”, “Growpacker”, “Receivership Specialists” and “Pelorus”.  Certificates of Insurance should be emailed in advance to [email protected] AND brought onsite.
    • The following additional requirements apply to riggers:
      • Riggers must have a Liability Endorsement covering the moving of property and equipment that belongs to others. This should remove any “care, custody or control” exclusions on Rigger’s general liability policy.
      • Riggers must have Excess or Umbrella Liability Insurance in the amount of $2,000,000 per occurrence and in the aggregate. Such Excess/Umbrella policy shall be excess over the Employers Liability, Commercial General Liability and Comprehensive Auto Liability policies and coverage shall be provided as Follow Form.
      •  

        Rigger shall purchase and maintain at its own discretion and expense, inland marine and cargo insurance in an amount equal to the insurable value of the purchased property, as well as any equipment Rigger bring on site. Rigger assumes all liability and risks, and agrees to waive all claims against Auctioneer and Additional Insureds, for damage to or loss of equipment, machinery, tools, supplies and other tangible personal property owned or supplied by Rigger.

      • Each of Rigger’s General Liability, Auto Liability and Excess/Umbrella Liability policies must include Auctioneer and Additional Insureds as additional insureds and be endorsed as Primary and Non‐Contributory as to any insurance maintained by Auctioneer and the Additional Insureds and shown on the certificate of insurance.
      • Rigger’s policy must have an endorsement in favor of the Auctioneer and Additional Insureds waiving the Rigger’s and its insurer’s rights of subrogation shall be issued with respect to the Commercial General Liability, Comprehensive Auto Liability, Workers Compensation and Employers Liability policies. Evidence of this endorsement must be noted on the certificate of insurance.
      • Any subcontractor employed by Rigger must maintain equivalent coverage.
Payments
  • Invoices will be sent following the auction and are due immediately upon receipt;
  • Payments may be made by credit card (up to $5,000), or wire transfer only.  Invoices under $5,000 will be provided with a link to pay by credit card.  Credit card payments are subject to a 4% surcharge. If you prefer to pay by wire transfer, please email [email protected] or call 805-496-8087, ext. 110 to request wire instructions.
  • Upon payment in full, you will receive a paid invoice by email to bring to checkout.
  • Payments are not accepted at the Auction Site;
  • Sales tax exemption forms can be faxed to 720-704-5408 or emailed to [email protected]

Item Pickup

Pickup Scheduling:  Buyers are responsible to make arrangements for items to be removed during posted times.  All removal is by APPOINTMENT ONLY.  Paid Buyers can schedule appointments with the facility direct upon payment (contact information will be provided on paid invoices).  Buyers arriving without an appointment will be accommodated on an ‘as available’ basis or may be turned away.  Appointment can be scheduled during the following dates and times:

    • We will NOT be open on the day of or day following the auction.
    • We will schedule appointments on the following days and times:
      • Friday November 1 – Friday November 8
      • 9am to 5pm Each Day (Closed Sunday)
      • Appointment Required

 

For assistance with shipping or rigging, please see our list of unaffiliated, 3rd party shippers.  Buyers must bring all materials, carts and manpower necessary to remove their purchases from where the items sit; we do not offer any loading or shipping services.  IMPORTANT: Buyers must arrive with an ID that matches the name on the invoice.  If sending a 3rd party to pickup on your behalf, you must complete and submit an Agent Release form to our office authorizing the 3rd party to pickup on your behalf.  The 3rd party must provide ID matching the Agent Release form and sign documentation upon arrival at pickup. 

 

 

3rd Party Shippers:  Below is a list of companies that can assist you with shipping. Please contact them directly for scheduling and pricing. These shipping company names are provided for your convenience and using one of these companies does not in any way alter your obligations for removal in accordance with the terms of sale. 

 

  • PREFERRED RIGGERS
    LA Machinery Movers – Julian Sanchez – Tel: 626-709-4892 – [email protected]
    Be certain to reference the Growpacker Auction when contacting them, as they have been onsite and will be able to provide quick rigging quotes for this sale.

 

 

  • INSURANCE REQUIREMENTS: Any buyer or buyer representative picking up items which require dismantling, rigging, utility disconnection, forklift or other machinery use onsite, etc., will need to provide a Certificate of Insurance with the following limits: General Liability 1M per occurrence / 2M aggregate; Umbrella 2M per occurrence / 2M aggregate; Auto 1M (owned/non-owned/hired); Workman’s Compensation Liability at statutory limits.  The following parties should be named as additional insured:  “ThreeSixty Asset Advisors”, “Growpacker”, “Receivership Specialists” and “Pelorus”.  Certificates of Insurance should be emailed in advance to [email protected] AND brought onsite.
    • The following additional requirements apply to riggers:
      • Riggers must have a Liability Endorsement covering the moving of property and equipment that belongs to others. This should remove any “care, custody or control” exclusions on Rigger’s general liability policy.
      • Riggers must have Excess or Umbrella Liability Insurance in the amount of $2,000,000 per occurrence and in the aggregate. Such Excess/Umbrella policy shall be excess over the Employers Liability, Commercial General Liability and Comprehensive Auto Liability policies and coverage shall be provided as Follow Form.
      • Rigger shall purchase and maintain at its own discretion and expense, inland marine and cargo insurance in an amount equal to the insurable value of the purchased property, as well as any equipment Rigger bring on site. Rigger assumes all liability and risks, and agrees to waive all claims against Auctioneer and Additional Insureds, for damage to or loss of equipment, machinery, tools, supplies and other tangible personal property owned or supplied by Rigger.
      • Each of Rigger’s General Liability, Auto Liability and Excess/Umbrella Liability policies must include Auctioneer and Additional Insureds as additional insureds and be endorsed as Primary and Non‐Contributory as to any insurance maintained by Auctioneer and the Additional Insureds and shown on the certificate of insurance.
      • Rigger’s policy must have an endorsement in favor of the Auctioneer and Additional Insureds waiving the Rigger’s and its insurer’s rights of subrogation shall be issued with respect to the Commercial General Liability, Comprehensive Auto Liability, Workers Compensation and Employers Liability policies. Evidence of this endorsement must be noted on the certificate of insurance.
      • Any subcontractor employed by Rigger must maintain equivalent coverage.

Contact Information

General Info: 1-888-345-SOLD
Payments & Pickup: 1-805-496-8087, option 3
Fax: 1-720-704-5408
Support Email:  [email protected]