888.345.SOLD [email protected]

Decommissioned Plating Facility Equipment

08oct10:30 am11:00 pm10:30 am - 11:00 pm Sale TypeTimed Online AuctionOwnership Orders Commerce Manufacturing Facility Closed...Decommissioned Plating Facility EquipmentGeography:Henderson, NV Calendar Status Bidding Now Open

 

BID NOW

Decommissioned & Never Installed Plating Facility to Be Sold

Decommissioned Plating Facility Equipment
RECTIFIERS | TANKS | WASTE WATER TREATMENT |  HOISTS | FILTRATION
PLUS… COPPER BUS, TOTES OF NICKEL, COMPRESSORS, BOILERS, PALLET RACKING AND MORE!

ABOUT: Dynaflex Products acquired a complete electroplating facility originally built by Jessup Engineering for Markland Industries, Inc., a long-established decorative plating operation. The plant was de-installed and relocated for a new operation that never entered production. Rising electrical demand from nearby data centers meant the site could never secure the power required to operate, and the project is now being liquidated. Nearly $4 million was invested in acquisition, de-installation, re-engineering and refurbishment. Nothing has been installed or run since. All equipment has been professionally cleaned and decommissioned, and held in indoor storage.

 

ASSETS INCLUDE

Rectifiers – (25) Dynapower Water-Cooled SCR Rectifiers, 3,000 to 7,500 Amp

  • (1) 7,500 Amp / 9 Volt, 460V 132 Amp 3-phase, electroclean duty
  • (2) 5,000 Amp / 9 Volt, 460V 93 Amp 3-phase, Woods nickel strike and acid activator duty
  • (1) 4,000 Amp / 12 Volt, 460V 91 Amp 3-phase, electroclean duty
  • (2) 3,000 Amp / 18 Volt, 460V 91 Amp 3-phase, nickel strike duty
  • (3) three-circuit, (3) x 3,500 Amp / 12 Volt each, 460V 226 Amp, semi-bright and bright nickel
  • (4) 3,500 Amp / 12 Volt, 460V 78 to 79 Amp, high-sulphur, satin and particle nickel, and chrome post dip
  • (3) 7,500 Amp / 15 Volt, 460V 197 Amp, trivalent chrome, hexavalent chrome and black chrome
  • (2) 3,000 Amp / 9 Volt, 460V 54 Amp 3-phase, activator and copper strike duty (one unused backup unit, water cooled)
  • (2) two-circuit, (2) x 3,000 Amp / 6 Volt each, model PSPLY-SCR-D, 460V 80 Amp, acid copper
  • (1) three-circuit, (3) x 3,000 Amp / 6 Volt, 460V 118 Amp, acid copper
  • (1) two-circuit, (2) x 3,500 Amp / 6 Volt, 460V 95 Amp, water cooled, acid copper strike
  • (2) three-circuit, (3) x 3,500 Amp / 6 Volt each, 460V 143 Amp, acid copper
  • (1) 3,000 Amp / 12 Volt, model PSPLY-SCR-D, 460V 63 Amp, porous pot / bath purification
  • Rectifier controller, rectifier phase monitors and Jessup 480V 3-phase control box
  • Several cabinets carry two or three independently controlled and metered outputs

Plating Line Components

  • Jessup 2,000 lb rack hoist and (3) 1,000 lb copper line hoist systems, with power cable and track
  • (3) motorized transfer shuttles, including the POP wet transfer shuttle
  • Assorted hoist encoders, nickel/chrome hoist wire harnesses and unused wire harness track
  • (2) line control panels, including a 5-door panel with VFDs and Allen-Bradley controls
  • Large lots of structural steel components, I-beams and channel, for mezzanine and tank support
  • Nickel/chrome superstructure and unused structural steel scaffolding supports
  • Titanium-lined service tank and metal rinse tanks
  • Nickel chrome tank dividers, tank saddles and weights, plastic shims
  • Tank sensors, tank shields, spargers and eductors, CPVC plumbing with eductors
  • Titanium tank coils and PVDF heating coils
  • HSI rotary positive displacement blowers and Spencer Turbine centrifugal blower, push air manifolds and assorted copper piping

Filtration & Fluid Handling

  • (8) Mefiag filtration systems, skid and cart mounted, with 3-phase pumps and slurry tanks, to 7.5 HP
  • 20 HP Kynar filter system, 24 in. cartridge
  • (3) Kynar PVDF filters
  • Sethco cartridge filter pump systems and polypropylene cartridge filters
  • Filter Pump Industries 12CT-48A CPVC cartridge filter housing
  • Wilden P1000, P2000, M4 and M5 diaphragm pumps, portable and fixed, many with filters
  • Crane S6H15S4B1 centrifugal pump with Baldor 50 HP motor, twin pump skid, and stainless pump station with (2) 20 HP and (1) 10 HP pumps
  • Assorted CPVC and PVC plumbing, ball valves and fittings

Process, Rinse & Storage Tanks

  • (14) new, unused 2024 Jessup Corotech process tanks, polypropylene with stainless reinforcement and steel, built for the nickel/chrome rebuild
  • (50+) Corro-Tech polypropylene process tanks with stainless steel supports, steel tanks and fiberglass tanks
  • Vertical polyethylene storage tanks, including 1,200 gallon
  • (3) Nalgene 500 gallon vertical storage tanks and a 2008 Jessup 4,357 gallon holding tank
  • Two-cell fiberglass tanks, strip tank with copper bus, and come bottom tank with stand
  • Norwesco 305 gallon vertical water storage tank

Water & Wastewater Treatment

  • (4) lots of Evoqua DF-415 flange membrane housings, 21 sq ft membrane, 19 tube
  • US Filter J-Press 118258/F filter press, 120/1/60
  • Fiberglass batch, process and storage tanks, several with mixers, to 1,480 gallons
  • Control and pump station for pH and ORP monitoring, with controllers and metering
  • Feeder pumps and control boxes, electrical panels, junction boxes and assorted valves
  • 2018 reverse osmosis machine with Viqua D4 UV, Goulds pumps and S150 controls, unused
  • (6) Pentair Structural composite water filtration and carbon media tanks with digital control valves
  • Soft water brine tank, HDPE vertical storage tanks and expansion tank with (2) stainless diaphragm pumps
  • Industrial tank mixers, stainless steel shaft

Compressed Air

  • 2008 Ingersoll Rand IRN75H-CC rotary screw air compressor, 75 HP, 145 PSI, 460V, Intellisys controls
  • 2009 Ingersoll Rand NVC400A400 refrigerated air dryer, 400 SCFM, 230 PSIG, 460V 3-phase
  • 2008 Steel Fab vertical air receiver tank, 150 PSI MAWP, ASME certified
  • Ingersoll Rand two stage reciprocating air compressor with horizontal receiver tank
  • Qwik-Pure 100 industrial oil-water separator

Heating & Cooling

  • Trane 25 ton air-cooled liquid chiller, model CGAFC254AAE1EHT, 460V 3-phase, R-22, Intellipak controls
  • Dunham-Bush ACDR30A air-cooled chiller, R-22, 460V 3-phase
  • (2) 2009 Unilux ZF400W flexible water tube boilers, 4,000 MBH, 160 PSIG, natural gas, with gas trains
  • Assorted heating and cooling coils, tank heating coils, boiler plumbing, valves and solenoids
  • Boiler expansion tank
  • Twin City Fan & Blower size 222 arrangement 9 centrifugal fan

Ventilation, Scrubbers & Dust Collection

  • 2011 Met-Pro Duall HEXmaster HMF-69, 15,165 CFM, FRP construction
  • 2007 Duall NH-98 centrifugal blower, 60 HP, 38,500 CFM
  • (2) 2008 Duall NH-108 industrial scrubber blowers, 75 HP, to 55,850 CFM
  • 2008 Duall HH-60 centrifugal blower, 15,165 CFM, 30 HP
  • New York Blower 48 GFF fume exhauster with Baldor 50 HP motor
  • Mapco Midwest Air MW 400 APC-3, 29,670 CFM, horizontal two-stage
  • New York Blower centrifugal fan with Siemens 10 HP motor, and assorted NOX scrubbers
  • Torit dust collector with 20 HP motor, and Donaldson Torit 30 CVC industrial dust collector
  • Flanders SURELOCK-B 3-stage HEPA filter
  • (4) Eaton SVX9000 VFD motor controllers
  • Lots of assorted hoods, and a pallet of helemeters, remotes, electrical and disconnects

Polishing Room & Laboratory

  • (4) polishing lathes, 3-phase, with tooling and replacement parts
  • Buck atomic absorption spectrometer, recently refurbished
  • Lots of assorted lab supplies, equipment and accessories

Facility Support

  • (9) 40 ft. storage containers, sold with their contents
  • Pallet racking: Approximately (60) 16′ Uprights, (300) 98.5″ & 143,5″ Crossbeams, (200+) Grid Decks – All dismantled
  • Approximately (120) parts racks on casters
  • (3) eye wash stations
  • 500 lb hoist, and (2) CM electric chain hoists, 1/4 ton and 1/2 ton
  • Large hydraulic cylinder and hydraulic pump from a 6 ft. service elevator
  • Steel bar grating panels, carbon steel, banded to pallets
  • Tank dolly and metal computer cabinet

Materials & Scrap

  • (44) totes of nickel: particle, bright, semi-bright, sulfamate and Woods nickel strike
  • (14) pallets of assorted copper bus, new old stock graphite anodes, (2) pallets of titanium anode baskets

Spares, Filters & Container Contents

  • Contents of (9) containers, including pallets of backup pump motors, filter housings, valves, fittings, rebuild kits, gaskets and hardware
  • Pallets of spare 14 in. and 19 in. filter discs, and a pallet of filter discs and cartridge filters
  • Pallet of replacement parts, rectifier phase monitors and more
  • Nickel/chrome line plumbing, CPVC and PVDF fittings, valves and eductors
  • Miscellaneous books and literature
  • Spare VFD, assorted disconnects and electrical

 

AVAILABLE FOR PRESALE: THE REFURBISHED & RE-ENGINEERED NICKEL/CHROME LINE. 2010 Jessup automated rack line, re-engineered and refurbished by Koch Finishing Systems in 2024, converted from a trench installation to an above-floor design, and never installed. Full multilayer nickel into trivalent and hexavalent chrome. (42) new process tanks, (13) Dynapower rectifiers to 7,500 amp, (4) refurbished 2,000 lb programmable hoists, new HMI controls, new in-line dryer, new mezzanine and track. Filtration on 13 positions. Includes the line’s fume scrubbers, exhaust fans, chiller and air agitation. Rated 6 loads per hour. The complete NiCr line remains available for sale prior to the auction. Interested parties can contact us at [email protected] for information on the complete line, including the components held in storage in Michigan and Missouri.

 

*Note: Asset Listing is Subject to Change.  Check auction catalog for final listing.

Questions about the sale, call toll free: email support@360assetadvisors.com
Never attended an auction?  Learn how to bid by reading frequently asked questions here.

 

Sale Date(s) & Time(s)

Catalog Online: Thursday, September 24
Online Bidding Closes: Thursday, October 8 starting at 10:30am PT
Item Removal: Monday, October 12 to Friday October 23 (closed Sunday)

Preview Date(s) & Time(s)

Tuesday, October 6 from 10am to 4pm, or by Appointment

Location(s)

748 W. Sunset Rd., Henderson, NV 89011

 

BID NOW

Important Information

Please click on each section (>) below for important sale information:

 

Terms of Sale - Highlights

The following highlights key sale terms and identifies sale specific terms. In all cases Sales Agent refers to ThreeSixty Asset Advisors, CA Global Partners and Fram Fram, as well as their partners and representatives. The following will highlight key buyer responsibilities; however, post auction activities for this sale are being managed by Fram Fram LLC. See the bidding site for more details, or see below for contact information.

 

  • SALE FORMAT: Timed online public auction. Bidding goes live Monday, September 28 and begins closing Thursday, October 8.
  • INSPECTION: Tuesday, October 6 from 10am to 4pm or by appointment
  • PAYMENT DEADLINE: All payments are due upon receipt of Invoice and no later than 2:00 pm PT on Monday, October 12;
  • PAYMENT METHODS: Payments for this sale may be made by wire transfer or credit card (credit card payments are accepted up to $5,000 and are subject to a 4% convenience fee). Wire transfer instructions will be provided with your invoice.
  • BUYER’S PREMIUM: A 20% Buyer’s Premium will be added to the price of each item.
  • SALES TAX: Applicable sales tax of 8.375% will be assessed on the purchase price plus buyers’ premium, unless you provide acceptable evidence of sales tax exemption.
  • REPRESENTATIONS: We do our best to provide information that will help Buyers to make purchase decisions, including indicating damage on items where known; however we do not guarantee descriptions or conditions. The absence of a condition note or of a photograph identifying a condition shall not imply that no condition issues exist. Equipment counts, ratings, capacities and dimensions are drawn from prior owner records, manufacturer documentation and engineering drawings, are estimated, and are not warranted. Further, neither Sales Agent nor Seller makes any representation, guarantee or warranty as to the provenance, authenticity or operability of any items offered for sale, or the conveyance of any third party rights, including but not limited to copyrights or licensure. If you are uncertain about an item, do not bid. All Items are sold ‘As-Is, Where-Is’, with all faults and without recourse. Buyer assumes all risks, and all sales are final. Note that all items are subject to prior sale and Sales Agent and Seller reserve the right to cancel the auction at any time.
  • PERMITS, ENVIRONMENTAL AND HANDLING: Buyer is responsible for obtaining and maintaining all licenses, permits, manifests and approvals required to take possession of, handle, transport and store the assets, and for compliance with all applicable federal, state and local environmental, transportation and workplace safety requirements. Neither Sales Agent nor Seller assumes any liability for Buyer’s handling, transport, storage or use of any asset.
  • REMOVAL: Buyers are responsible to make arrangements for items to be removed during posted times. Removal is managed on a first come, first served basis and bidders and buyers may need to wait for staff or dock access before picking up. For assistance with shipping or rigging, please see our list of unaffiliated, 3rd party shippers. Buyers must bring all materials, carts and manpower necessary to remove their purchases from where the items sit and used licensed and insured riggers for installed items; we do not offer any loading or shipping services. IMPORTANT: Buyers must arrive with an ID that matches the name on the invoice. If sending a 3rd party to pickup on your behalf, you must complete an Agent Release form here: https://360bid.short.gy/agent_release-dp. The 3rd party must provide ID matching the Agent Release form and sign documentation upon arrival at pickup.
  • REMOVAL TIMES:
    • Monday, October 12 to Friday, October 23 (closed Sunday)
    • 9am to 4pm each day by Appointment
  • DEFAULT: Upon award of bid, Buyers are deemed responsible for a non-refundable 25% deposit. While Sales Agent may elect not to collect the deposit in good faith, in the event of a Buyer default, Buyer’s acceptance of these Terms of Sale, evidenced by their participation in the sale, shall serve as Buyer’s authorization for Sales Agent to pursue whatever means necessary to collect upon the 25% deposit as liquidated damages. In addition to the collection or retention of Buyer’s deposit, Sales Agent may resell the assets and may report Buyer’s failure to perform on its obligations to the Bidding Platform’s system impacting Buyer’s future ability to participate in future sales.
  • COPPER BUS BAR WEIGHTS: All weights stated in the auction catalog are approximate gross weights, obtained from using a platform shipping scale onsite, and include the pallet, packaging, and any materials, hardware, components, or other items attached to or included with the copper bus bar. While the Auctioneer believes the stated weights to be reasonably accurate, no guarantee or warranty is made as to the actual weight or net copper content of any lot. Buyers are responsible for conducting their own inspection and due diligence prior to bidding. No adjustments, refunds, credits, or claims will be allowed based on any difference between the stated weight and actual weight or net copper weight.
  • OTHER: Sales Agent is acting as agent only and is not responsible for the acts or omissions of its client. Sales Agent is not the shipper, rigger or exporter of any purchased items being shipped from the sale site. These terms and conditions together with any amendments or modifications expressly made by the Sales Agent constitute all the terms and conditions with respect to the sale of the assets offered. There are no representations, warranties, terms, conditions, undertakings, or collateral agreements except as hereinabove provided. Inventory is subject to change and Sales Agent reserves the right to add, combine, delete, withdraw or sell lots prior to the sale, including by sale in advance of the auction.
  • INSURANCE REQUIREMENTS: Any buyer or buyer representative picking up items which require dismantling, rigging, utility disconnection, forklift or other machinery use onsite, etc., will need to provide a Certificate of Insurance with the following limits: General Liability 1M per occurrence / 2M aggregate; Umbrella 2M per occurrence / 2M aggregate; Auto 1M (owned/non-owned/hired); Workman’s Compensation Liability at statutory limits, and name the following parties as additional insured: ThreeSixty Asset Advisors, LLC, CA Global Partners, Inc., Fram Fram, LLC. See links on this page for Bidder or Rigger Insurance Requirement/Agreement. These documents include the full insurance requirements and require a signature prior to removal.
Payments
  • PAYMENT DEADLINE: All payments are due upon receipt of Invoice and no later than 2:00 pm PT on Monday, October 12;
  • PAYMENT METHODS: Payments for this sale may be made by wire transfer or credit card (credit card payments are accepted up to $5,000 and are subject to a 4% convenience fee). Wire transfer instructions will be provided with your paid invoice.
  • PAYMENT CONTACT: Payments and invoicing for this sale are handled by Fram Fram LLC. Direct accounting and payment questions to [email protected].

Item Pickup / 3rd Party Shippers / Insurance

Buyers are responsible to make arrangements for items to be removed during posted times and to coordinate electrical disconnect and riggers as applicable.

  • REMOVAL: Buyers are responsible to make arrangements for items to be removed during posted times. Removal is managed on a first come, first served basis and bidders and buyers may need to wait for staff or dock access before picking up. For assistance with shipping or rigging, please see our list of unaffiliated, 3rd party shippers. Buyers must bring all materials, carts and manpower necessary to remove their purchases from where the items sit and used licensed and insured riggers for installed items; we do not offer any loading or shipping services. IMPORTANT: Buyers must arrive with an ID that matches the name on the invoice. If sending a 3rd party to pickup on your behalf, you must complete an Agent Release form here: https://360bid.short.gy/agent_release-dp. The 3rd party must provide ID matching the Agent Release form and sign documentation upon arrival at pickup.
  • REMOVAL TIMES:
    • Monday, October 12 to Friday, October 23 (closed Sunday)
    • 9am to 4pm each day by Appointment
  • INSURANCE REQUIREMENTS: Any buyer or buyer representative picking up items which require dismantling, rigging, utility disconnection, forklift or other machinery use onsite, etc., will need to provide a Certificate of Insurance with the following limits: General Liability 1M per occurrence / 2M aggregate; Umbrella 2M per occurrence / 2M aggregate; Auto 1M (owned/non-owned/hired); Workman’s Compensation Liability at statutory limits, and name the following parties as additional insured: ThreeSixty Asset Advisors, LLC, CA Global Partners, Inc., Fram Fram, LLC.
  • 3RD PARTY SHIPPERS/RIGGERS: See our link above of 3rd Party referral companies, that may be able to assist you with shipping. Please contact them directly for scheduling and pricing or use your own company. These shipping company names are provided for your convenience and using one of these companies does not in any way alter your obligations for removal in accordance with the terms of sale.
  •  

 

Contact Information

Payment, removal and all post auction activities for this sale are coordinated through Fram Fram LLC.

Sale in Cooperation With:

 

NOTE ALL INVOICING AND TRANSACTIONS WILL TAKE PLACE WITH CA GLOBAL PARTNERS (CAGP)